It is mainly used for spraying liquid additives, such as oil, liquid fat, etc. to extruded pellets directly after drying section; The recommended pellet diameter is 2-18mm with moisture content of 8% in order to absorb liquid additives
◆ Horizontal structure with larger the horizontal area brings the material into contact with the spraying liquid;
◆ Three rows of nozzles uniformly distributed on the rotor axial make spraying more uniform; High accuracy and uniformity of liquid spraying (CV≤5%);
◆ The addition liquid amount that can be batched ranges from 2%~35%; The vacuum pressure inside the mixing chamber is up to 20mBar.
| Model | Capacity（t/h) | Power（kw） | Addition range | Addition time |
| KDVM1 | 1-2 | 22 5.5 1.5*3 | 5-35% | 6-12min |
| KDVM3 | 3-4 | 22 11 1.5*3 | 5-35% | 6-12min |
| KDVM5 | 4-6 | 30 15*2 1.5*3 | 5-35% | 6-12min |
| KDVM10 | 6-10 | 37 15*2 1.5*3 | 5-35% | 6-12min |
| KDVM20 | 10-12 | 45 22*2 2.2*3 | 5-35% | 6-12min |
苏公网安备 32100302010386号
